HP Xw460c HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 73
Set Enclosure Name, Set Enclosure Part_ Number, Set Enclosure Pdu_type
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
o The default enclosure asset tag is blank • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be 1 to 32 characters long and includes all alphanumeric, underscore (_), and dash (-) characters. SET ENCLOSURE NAME • Command: SET ENCLOSURE NAME "" • Description: o Changes the enclosure name o The default enclosure name is the mid-plane serial number • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be 1 to 32 characters long and includes all alphanumeric, underscore (_), and dash (-) characters. SET ENCLOSURE PART_ NUMBER • Command: SET ENCLOSURE PART_NUMBER "" • Description: Sets the part number of the enclosure • Access level/Bay level: OA administrator • Restrictions: Must be 10 characters in length and the first character must be a digit. Acceptable characters are all alphanumeric and the dash (-). SET ENCLOSURE PDU_TYPE • Command: SET ENCLOSURE PDU_TYPE {1|2|3|4} • Description: Sets the enclosure PDU type to: o 1=Single-phase o 2=Three-phase Enclosure management commands 73