HP Xw460c HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 97
Reboot Server, Set Nic, Set Server Boot
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
REBOOT SERVER • Command: REBOOT SERVER {ALL | ]} [FORCE] [{NORMAL |PXE | HDD | RBSU}] • Description: o Sends a request to the blade to perform a graceful shutdown. o The blade is then powered on. o If no blade is in the specified bay, you are notified that the bay is empty. • Access level/Bay level: Administrator, operator Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to storage blades. SET NIC • Command: SET NIC {AUTO | FORCED} • Description: Configures the external NIC for Auto-negotiation or forced link settings. • Access level/Bay level: OA administrator • Restrictions: None SET SERVER BOOT • Command: SET SERVER BOOT {FIRST | ONCE} {NORMAL | HDD | PXE | RBSU } {ALL | ]} • Description: o Sets the server boot order to hard disk (HDD) or PXE. This stores a setting for the IPL to be passed to the severs specified at the next reboot. o SET SERVER BOOT FIRST sets the boot order of the blade. o SET SERVER BOOT ONCE sets the boot device to be used on the next boot of the bays specified; the RBSU option is only available for SET SERVER BOOT ONCE. • Access level/Bay level: Administrator, operator Blade management commands 97