HP Xw8200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 102

Adaptec SCSI RAID Software Reference Guide container list To display information about one or all arrays on the controller, use the container list command. The display contains such information as the container's ID number and other useful information. Typically, you use the container list command to obtain specific information about arrays prior to using other arrayrelated commands. Syntax container list [/all{=boolean}] [/full{=boolean}] [{container}] Parameters {container} Specifies the ID number (0 to 63) of the array whose information you want to display. To display information about all of the arrays on the system, omit the ID number from the command. Switches /all{=boolean} Specifies whether to list all arrays on the system. If you specify TRUE, the command displays all arrays on the system. If you specify FALSE, the command displays only the array you specify in the command. This switch defaults to FALSE if you specify a container. Otherwise, the switch defaults to TRUE. /full{=boolean} Specifies whether to display detailed information. If you specify TRUE, the command displays detailed information. If you specify FALSE, the command does not display detailed information. This switch defaults to FALSE. 5-54