HP Xw8200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 240

Adaptec SCSI RAID Software Reference Guide diagnostic moderation set timer To set the default interrupt timer on the controller, use the diagnostic moderation set timer command. ! Caution: Use this command only under the direction of technical support. Syntax diagnostic moderation set timer {integer} Parameters {integer} Specifies the value (for example, 10) you want to set as the default interrupt timer on the controller. The interrupt timer is the delay time in 100 microsecond units before the controller issues an interrupt to the host computer. For example if the interrupt timer is set to 10, the controller batches I/O request responses for one millisecond and issues an interrupt to the host computer. The default interrupt timer is 0 (zero). Related Information diagnostic commands: ■ diagnostic moderation set count (page 8-7) ■ diagnostic moderation show count (page 8-9) ■ diagnostic moderation show timer (page 8-10) 8-8