HP Xw8200 Adaptec SCSI RAID 2120S: Software Reference Guide - Page 108

Adaptec SCSI RAID Software Reference Guide The RO Column This column displays the letters RO if the array is read-only. Otherwise, if the array is read-write the column displays a blank space. You can explicitly make an array read-only and read-write with the container readonly and container readwrite commands. Some CLI commands cause an array to temporarily become readonly without the use of the container readonly command. The Lk Column This column displays the letter L if the array is locked. Otherwise, if the array is not locked, the column displays a blank space. You can explicitly lock and unlock an array with the container lock and container unlock commands. Some CLI commands (during their execution) cause the array to become locked. Typically these commands unlock the array upon completing execution. The Task Column This column displays the task or tasks running on a specified array or SCSI disk. Specifically, the column can display the items listed in Table 5-4. Task Create FmtFAT Table 5-4. Task Types Meaning A create mirror set or create multilevel mirror set task is running on the specified array. When the create mirror set or create multilevel mirror set task completes, the specified array is a mirror set or a multilevel array of mirror sets. The create a mirror set or create a multilevel mirror set task runs as a result of using the container create mirror or container create mmirror command. An array format FAT file system task is running on the specified array. The format FAT file system task runs as a result of using the container format command with the /file_system switch set to FAT. 5-60