HP Xw9300 NVIDIA: RAID Users Guide - Page 117
Windows 2000 Limitation with Bootable RAID, Problem, Solution, Use the NVRAIDMAN Tool
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
CHAPTER 5 NVIDIA RAID Application Notes Windows 2000 Limitation with Bootable RAID Problem In Windows 2000 (Service Pack 2 or previous versions), the end user cannot install this operating system to a bootable RAID volume. Solution There are two solutions to resolve this issue, described as follows: Use the NVRAIDMAN Tool Use the NVRAID Tool (nForce Driver Version 5.xx) to convert the boot volume to a RAID array. The following are step by step instructions: 1 Install Windows 2000 on a selected hard drive. 2 Download and install Windows 2000 Service Pack 4 from Microsoft's website. 3 Reboot the system 4 Press the DEL key as the system is rebooting to enter into the system BIOS. 5 Select Integrated Peripherals menu. 6 Select the RAID Config menu. 7 Enable RAID for the selected drive (the one containing the Windows 2000 operating system). 8 Press F10 to exit and save settings in the system BIOS. This action reboots the System. 9 Press F10 as the system is rebooting to go into the RAID ROM. The system directs you into the NVIDIA RAID Utility. 10 Select Striping under RAID Mode. 11 Press TAB to go into the Free Disk menu. 12 Use the Right Arrow key to add the desired disk. NVIDIA Corporation 113