HP Xw9300 NVIDIA: RAID Users Guide - Page 83
Morphing from RAID 0 (with One Disk) to RAID 1 (with Two Disks),
![]() |
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
CHAPTER 3 Using the NVRAIDMAN Utility Morphing from RAID 0 (with One Disk) to RAID 1 (with Two Disks) The following example shows you how to convert a RAID 0 array with one disk to a RAID 1 array (with two disks) 1 Go to the system BIOS and make sure that the drives that you want to use are RAID enabled. 2 Boot to Windows, launch the NVRAIDMAN application, then follow the steps outlined in "Creating a Striped Array" on page 52 with the exception that you need to select one disk instead of two disks. When that is done, you should see a screen shot similar to the following: Figure 3.62 RAID Array Created 3 Click click on Striping and select "Convert Array..." as shown in the following screen shot: Figure 3.63 Selecting "Convert Array" from the Pop Up Menu NVIDIA Corporation 79
![](/manual_guide/products/hewlettpackard-xw9300-nvidia-raid-users-guide-89b89f0/83.png)