HP Xw9300 NVIDIA: RAID Users Guide - Page 16
Setting Up a Non-Bootable NVIDIA RAID Array, Setup Used in
![]() |
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CHAPTER 2 Setting Up Your RAID Configuration Setting Up a Non-Bootable NVIDIA RAID Array All of the tasks that are related to a non-bootable NVIDIA RAID Array can be performed from Windows using the NVRAIDMAN utility. Setup Used in This Section This section assumes the following setup: • Boot Disk One hard disk connected to the Primary IDE channel, and set to Master or Slave. • RAID Array Disks • RAID0 Two hard disks connected to the secondary IDE channel, where one is set to Master and the other set to Slave. This example shows how to enable RAID 0 on the two hard disks. • RAID1 Two hard disks connected to the secondary IDE channel, where one is set to Master and the other set to Slave. This example shows how to enable RAID 1 on the two hard disks. • JBOD/Spanning Two hard disks connected to the secondary IDE channel, where one is set to Master and the other set to Slave. This example shows how to enable a JBOD/Spanning array on the two hard disks. • RAID0+1 Two hard disks connected to the secondary IDE channel, where one is set to Master and the other set to Slave Two SATA hard disks Two hard disks will be used for striping and two hard disks will be used for mirroring. 12 NVIDIA RAID User's Guide - Version 2.0 A
![](/manual_guide/products/hewlettpackard-xw9300-nvidia-raid-users-guide-89b89f0/16.png)