HP Xw9300 NVIDIA: RAID Users Guide - Page 96
Morphing from RAID 1 to RAID 0+1
![]() |
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
CHAPTER 3 Using the NVRAIDMAN Utility Morphing from RAID 1 to RAID 0+1 The following example shows you how to convert from a RAID 1 array with two disks to a RAID 0+1 array with four disks. 1 Goto the system BIOS and make sure that the drives that you want to use are RAID enabled. 2 Boot to Windows, launch the NVRAIDMAN application, then follow the steps outlined in "Creating a Mirrored Array" on page 57 to create a two-disk mirrored array. When that is done, you should see a screen shot similar to the following: Figure 3.83 RAID Array Created Now that a two-disk mirrored array has been created, you can use the NVRAIDMAN convert feature to morph the array from a two-disk RAID 1 into a four-disk RAID 0+1 array. 92 NVIDIA RAID User's Guide - Version 2.0 A
![](/manual_guide/products/hewlettpackard-xw9300-nvidia-raid-users-guide-89b89f0/96.png)