HP Xw9300 NVIDIA: RAID Users Guide - Page 65
Creating a Stripe Mirroring Array,
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
CHAPTER 3 Using the NVRAIDMAN Utility Creating a Stripe Mirroring Array NVRAIDMAN can be used to create a Stripe Mirroring array which requires at least four disks to start such an array. To create a Stripe Mirror Array do the following: 1 Go to the system BIOS and make sure that the drives that you want to use are RAID enabled. 2 Boot to Windows, launch the NVRAIDMAN application, then click on Create Array and the following screen will appear Figure 3.37 Create Array Wizard-Welcome Page NVIDIA Corporation 61
NVIDIA Corporation
61
C
HAPTER
3
Using the NVRAIDMAN Utility
Creating a Stripe Mirroring Array
NVRAIDMAN can be used to create a Stripe Mirroring array which requires at least four
disks to start such an array.
To create a Stripe Mirror Array do the following:
1
Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2
Boot to Windows, launch the NVRAIDMAN application, then click on Create Array
and the following screen will appear
Figure 3.37
Create Array Wizard—Welcome Page