HP Xw9300 NVIDIA: RAID Users Guide - Page 29
Configuring the NVIDIA RAID BIOS, Entering the RAID BIOS Setup
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
CHAPTER 2 Setting Up Your RAID Configuration Configuring the NVIDIA RAID BIOS The NVIDIA RAID BIOS set up lets you choose the RAID type and which hard drives you want to make part of the array. Entering the RAID BIOS Setup: 1 Wait until you see the RAID software prompting you to press F10. The RAID prompt appears as part of the system POST and boot process prior to loading of the OS. You have a few seconds to press F10 before the screen disappears. 2 Press F10. The NVIDIA RAID Utility-Define a New Array screen appears (Figure 2.14). NVIDIA RAID Utility - Define a New Array - RAID Mode: Mirroring Striping Block: Optimal Free Disks Loc Disk Model Name 1.0.M ST380023AS 1.1.M ST380023AS Array Disks Loc Disk Model Name [ ] Add [ ] Del [F6] Back [F7] Finish [TAB] Navigate [ ] Select [ENTER] Popup Figure 2.14 NVIDIA RAID Utility By default, RAID Mode is set to Mirroring and Striping Block is set to Optimal. NVIDIA Corporation 25