HP Xw9300 NVIDIA: RAID Users Guide - Page 18
Enter the RAID BIOS Setup by pressing,
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
CHAPTER 2 Setting Up Your RAID Configuration 3 Use the arrow keys to select the RAID Config (see Figure 2.2), then press Enter. The RAID Config window appears.. Phoenix - Award BIOS CMOS Setup Utility RAID Config RAID Enable IDE Primary Master IDE Primary Slave IDE Secndry Master IDE Secndry Slave Ext SATA Phy Primary Ext SATA Phy Secndry Int SATA Phy Primary Int SATA Phy Secndry [Enable] RAID [Disabled] RAID [Disabled] RAID [Enabled] RAID [Enabled] RAID [Disabled] RAID [Disabled] RAID [Disabled] RAID [Disabled] Item Help Menu Level :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Figure 2.3 RAID Config Window 4 From the RAID Config window, enable RAID, then enable the disks that you want to use as RAID disks. In Figure 2.3, the master and slave drives on the secondary IDE port are enabled as RAID disks. Make sure to enable the SATA drives also if you are setting up a RAID 0+1 array. 5 Press F10 to save the configuration and exit. The PC reboots. 6 Enter the RAID BIOS Setup by pressing F10 when prompted, and proceed to set up the NVIDIA RAID BIOS as described in the next section. 14 NVIDIA RAID User's Guide - Version 2.0 A