HP Xw9300 NVIDIA: RAID Users Guide - Page 56
Creating RAID Arrays, Creating a Striped Array
![]() |
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
CHAPTER 3 Using the NVRAIDMAN Utility Creating RAID Arrays This section includes examples of using NVRAIDMAN for • Creating a Striped Array • Creating a Mirrored Array • Creating a Stripe Mirroring Array • Creating a Spanning Array In these examples, the system is configured with four SATA hard disks. Creating a Striped Array NVRAIDMAN can be used to create a striped array from one disk up to the maximum supported number of disks in the system. To create a two-disk Striped Array do the following: 1 Go to the system BIOS and make sure that the drives that you want to use are RAID enabled. 2 Boot to Windows and launch the NVRAIDMAN application. 52 NVIDIA RAID User's Guide - Version 2.0 A
![](/manual_guide/products/hewlettpackard-xw9300-nvidia-raid-users-guide-89b89f0/56.png)
52
NVIDIA RAID User’s Guide
– Version 2.0 A
C
HAPTER
3
Using the NVRAIDMAN Utility
Creating RAID Arrays
This section includes examples of using NVRAIDMAN for
•
Creating a Striped Array
•
Creating a Mirrored Array
•
Creating a Stripe Mirroring Array
•
Creating a Spanning Array
In these examples, the system is configured with four SATA hard disks.
Creating a Striped Array
NVRAIDMAN can be used to create a striped array from one disk up to the maximum
supported number of disks in the system.
To create a two-disk Striped Array do the following:
1
Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2
Boot to Windows and launch the NVRAIDMAN application.