HP Xw9300 NVIDIA: RAID Users Guide - Page 15
Setting Up Your RAID Configuration, Basic Configuration Instructions, Non-Bootable RAID Array
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CHAPTER SETTING UP YOUR RAID CONFIGURATION Basic Configuration Instructions The following are the basic steps for configuring NVIDIA RAID: Non-Bootable RAID Array 1 Choose the hard disks that are to be RAID enabled in the system BIOS. 2 Specify the RAID level, either Mirroring (RAID 1), Striping (RAID 0), Mirrored Striping (RAID 0+1), or Spanning (JBOD) and create the desired RAID array. 3 Run the Windows nForce Setup application and install the RAID software. 4 Initialize the NVRAID Array Disks See "Initializing and Using the Disk Array" on page 33. Bootable RAID Array 1 Choose the hard disks that are to be RAID enabled in the system BIOS. 2 Specify the RAID level, either Mirroring (RAID 1), Striping (RAID 0), Mirrored Striping (RAID 0+1), or Spanning (JBOD) and create the desired RAID array. 3 Boot from the Windows CD and install the nForce RAID software. 4 Initialize the NVRAID Array Disks See "Initializing and Using the Disk Array" on page 33. NVIDIA Corporation 11