HP Xw9300 NVIDIA: RAID Users Guide - Page 78
Morphing Instructions, Morphing from RAID 0 to RAID 0-Adding a Disk to a Stripe Set
![]() |
View all HP Xw9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
CHAPTER 3 Using the NVRAIDMAN Utility Morphing Instructions This sections includes specific instructions for the following RAID morphing combinations: • "Morphing from RAID 0 to RAID 0-Adding a Disk to a Stripe Set" on page 74 • "Morphing from RAID 0 (with One Disk) to RAID 1 (with Two Disks)" on page 79 • "Morphing from RAID 0 to RAID 0+1" on page 83 • "Morphing from RAID 1 to RAID 0" on page 88 • "Morphing from RAID 1 to RAID 0+1" on page 92 • "Morphing from RAID 0+1 to RAID 0" on page 97 • "Morphing from RAID 0+1 to RAID 0+1" on page 101 Morphing from RAID 0 to RAID 0-Adding a Disk to a Stripe Set The following example shows you how to expand a RAID 0 array with two disks to include an additional disk. 1 Go to the system BIOS and make sure that the drives that you want to use are RAID enabled. 2 Boot to Windows, launch the NVRAIDMAN application, then follow the steps outlined in "Creating a Striped Array" on page 52 to create a two disk stripe array. When that is done, you should see a screen shot similar to the following: Figure 3.55 RAID Array Created 74 NVIDIA RAID User's Guide - Version 2.0 A
![](/manual_guide/products/hewlettpackard-xw9300-nvidia-raid-users-guide-89b89f0/78.png)