HP Z4 Maintenance and Service Guide - Page 34
Rear fan
View all HP Z4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Rear fan Follow these steps to remove the rear fan: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 16). 2. Remove the access panel (see Access panel on page 20). 3. Remove the four Phillips M5.0×12.0 screws (1) that secure the rear fan to the computer.. 4. Lift the rear fan (2) as far as the rear fan cable allows. 5. Disconnect the rear fan cable (3) from the system board. 6. Remove the rear fan. Reverse this procedure to install the rear fan. 26 Chapter 4 Removal and replacement procedures
Rear fan
Follow these steps to remove the rear fan:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
16
).
2.
Remove the access panel (see
Access panel
on page
20
).
3.
Remove the four Phillips M5.0×12.0 screws
(1)
that secure the rear fan to the computer..
4.
Lift the rear fan
(2)
as far as the rear fan cable allows.
5.
Disconnect the rear fan cable
(3)
from the system board.
6.
Remove the rear fan.
Reverse this procedure to install the rear fan.
26
Chapter 4
Removal and replacement procedures