HP Z4 Maintenance and Service Guide - Page 37
processor and processor holder onto the heat sink
View all HP Z4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
CAUTION: When installing the processor into the processor holder, make sure the corner of the processor with the triangle icon (1) is aligned with the corner of the processor holder with the triangle icon (2), and the notches (3) in the processor are aligned with the ribs (4) on the processor holder clips. When installing the processor and processor holder onto the heat sink, make sure the corner of the processor holder with the triangle icon (2) is aligned with the corner of the heat sink with the triangle icon (5). Failure to follow this caution can result in damage to the processor and system board and system failure. Processor 29
CAUTION:
When installing the processor into the processor holder, make sure the corner of the processor
with the triangle icon
(1)
is aligned with the corner of the processor holder with the triangle icon
(2)
, and the
notches
(3)
in the processor are aligned with the ribs
(4)
on the processor holder clips. When installing the
processor and processor holder onto the heat sink, make sure the corner of the processor holder with the
triangle icon
(2)
is aligned with the corner of the heat sink with the triangle icon
(5)
. Failure to follow this
caution can result in damage to the processor and system board and system failure.
Processor
29