HP Z6100 HP Designjet Z6100 Printer Series - Setup Poster (42 inch) - Page 14
m 3 feet
UPC - 882780989535
View all HP Z6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
90 Wait until this message appears on the front panel. 91 Open the printer window. 92 Lift the paper-load lever. 93 Pull out approximately 1m (3 feet) of paper to avoid back tension on the spindle, which can cause difficulties when loading the paper into the printer. 1 m (3 feet) 94 Insert the lead-edge of the paper into the printer, above the black roller. 95 Wait until the paper emerges from the printer as shown. 96 Make sure that the paper is aligned with the blue line and the semicircle on the platen. 97 Lower the paper-load lever. Page 14
Page 14
1 m (3 feet)
90
91
92
Wait until this message appears on the front
panel.
93
Open the printer window.
94
Lift the paper-load lever.
95
Pull out approximately 1m (3 feet) of paper to
avoid back tension on the spindle, which can
cause difficulties when loading the
paper into
the printer.
96
Insert the lead-edge of the paper into the printer,
above the black roller.
97
Wait until the paper emerges from the printer as
shown.
Make sure that the paper is aligned with the
blue line and the semicircle on the platen.
Lower the paper-load lever.