HP dx2390 Service Reference Guide: HP Compaq dx2390 Business PC - Page 61
Connect the power cable, are installed on the interior of the front bezel. The 6-32 screws are silver.
View all HP dx2390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
2. Slide the new drive into the hard disk drive cage (1), aligning the drive with the four screw holes on the cage. Install the four 6-32 standard screws that secure the hard disk drive to the hard disk drive cage (2). Make sure the hard disk drive cables are facing the top of the drive cage. NOTE: If you are replacing an old drive with a new drive, use the four retainer screws from the old drive to install the new drive. NOTE: If you are installing a second hard drive, use four of the extra standard 6-32 screws that are installed on the interior of the front bezel. The 6-32 screws are silver. 3. Connect the power cable (1) and data cable (2) to the back of the hard drive. CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires. Drives 55