HP rp7420 Installation Guide, Fifth Edition - HP 9000 rp7420 Server - Page 31

Unpacking a Racked Server, Wear protective glasses while cutting the plastic bands around the shipping

Get HP rp7420 PDF manuals and user guides View all HP rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Unpacking the Server Unpacking a Racked Server Unpacking a Racked Server This section contains information about unpacking the cabinet. WARNING Wear protective glasses while cutting the plastic bands around the shipping container. These bands are under tension. When cut, they can spring back and cause serious eye injury. NOTE Position the pallet to allow for enough space to roll the cabinet off the pallet before unpacking. Remove the cabinet using the following procedure: 1. Cut the polystrap bands around the shipping container. 2. Lift the cardboard top cap from the shipping box. See Figure 2-1. 3. Remove the corrugated wrap from the pallet. 4. Remove the packing materials. Chapter 2 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Chapter 2
Unpacking the Server
Unpacking a Racked Server
31
Unpacking a Racked Server
This section contains information about unpacking the cabinet.
WARNING
Wear protective glasses while cutting the plastic bands around the shipping
container. These bands are under tension. When cut, they can spring back and cause
serious eye injury.
NOTE
Position the pallet to allow for enough space to roll the cabinet off the pallet before unpacking.
Remove the cabinet using the following procedure:
1. Cut the polystrap bands around the shipping container.
2. Lift the cardboard top cap from the shipping box. See Figure 2-1.
3. Remove the corrugated wrap from the pallet.
4. Remove the packing materials.