HP rp7420 Installation Guide, Fifth Edition - HP 9000 rp7420 Server - Page 66
Setting Up the Customer Engineer Tool (PC), Setting CE Tool Parameters
View all HP rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Cabling and Power Up MP Core I/O Connections Setting Up the Customer Engineer Tool (PC) The Customer Engineer (CE) Tool is usually a laptop. It allows communication with the MP in the HP 9000 rp7420 Server. The MP monitors the activity of either a one partition or a multiple-partition configuration. During installation, communicating with the MP enables such tasks as: • Verifying that the components are present and installed correctly • Setting LAN IP addresses • Shutting down cell board power Communication with the MP is established by connecting the CE Tool to the local RS-232 port on the MP Core I/O card. Setting CE Tool Parameters After powering on the CE Tool, ensure the communications settings are as follows: • 8/none (parity) • 9600 baud • na (Receive) • na (Transmit) 66 Chapter 4