HP rp7420 Installation Guide, Fifth Edition - HP 9000 rp7420 Server - Page 38
Remove Cushions for Lift Access, Remove Cushions
View all HP rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Unpacking the Server Unpacking a Non-Racked Server 3. Remove the two foam cushions for lift access as shown in Figure 2-7. Figure 2-7 Remove Cushions for Lift Access Clearance for RonI lift is 28" x 5" Remove Cushions 4. Insert the lifter forks under the server. 5. Carefully roll the lift forward until it is fully positioned against the side of the server. 38 Chapter 2
Chapter 2
Unpacking the Server
Unpacking a Non-Racked Server
38
3. Remove the two foam cushions for lift access as shown in Figure 2-7.
Figure 2-7
Remove Cushions for Lift Access
4. Insert the lifter forks under the server.
5. Carefully roll the lift forward until it is fully positioned against the side of the server.
Remove Cushions
Clearance for RonI lift is
28” x 5”