HP rp7420 Installation Guide, Fifth Edition - HP 9000 rp7420 Server - Page 34
Preparing to Roll Off the Pallet
View all HP rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Unpacking the Server Unpacking a Racked Server 6. Remove the six bolts from the base that attaches the rack to the pallet. See Figure 2-3. Figure 2-3 Preparing to Roll Off the Pallet WARNING Be sure that the leveling feet on the rack are raised before you roll the rack down the ramp and any time you roll the rack on the casters. Use caution when rolling the cabinet off the ramp. A single server in the cabinet weighs approximately 665 pounds. HP strongly recommends that two people roll the cabinet off the pallet. 34 Chapter 2
Chapter 2
Unpacking the Server
Unpacking a Racked Server
34
6. Remove the six bolts from the base that attaches the rack to the pallet. See Figure 2-3.
Figure 2-3
Preparing to Roll Off the Pallet
WARNING
Be sure that the leveling feet on the rack are raised before you roll the rack down
the ramp and any time you roll the rack on the casters. Use caution when rolling the
cabinet off the ramp. A single server in the cabinet weighs approximately 665
pounds. HP strongly recommends that two people roll the cabinet off the pallet.