HP rp7420 Installation Guide, Fifth Edition - HP 9000 rp7420 Server - Page 50

Attaching a Caster to the Server, Front Casters

Get HP rp7420 PDF manuals and user guides View all HP rp7420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 50 highlights

Installing Accessories Wheel Kit Installation 9. Locate and remove one of the four screws from the plastic pouch. Attach the a caster to the server. Figure 3-5 Attaching a Caster to the Server Front Casters 10. Attach the remaining casters to the server using the screws supplied in the plastic pouch. 11. Remove the foam blocks from the left and right side of the server. 12. Locate the plywood ramp. 13. Attach the ramp to the edge of the pallet. NOTE There are two pre-drilled holes in the ramp. Use the two screws taped to the ramp to attach the ramp to the pallet. 14. Carefully roll the server off the pallet and down the ramp. 15. Locate the caster covers. 50 Chapter 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Chapter 3
Installing Accessories
Wheel Kit Installation
50
9. Locate and remove one of the four screws from the plastic pouch. Attach the a caster to the server.
Figure 3-5
Attaching a Caster to the Server
10. Attach the remaining casters to the server using the screws supplied in the plastic pouch.
11. Remove the foam blocks from the left and right side of the server.
12. Locate the plywood ramp.
13. Attach the ramp to the edge of the pallet.
NOTE
There are two pre-drilled holes in the ramp. Use the two screws taped to the ramp to attach
the ramp to the pallet.
14. Carefully roll the server off the pallet and down the ramp.
15. Locate the caster covers.
Front Casters