Home » HP Manuals » Desktops » HP t520 » Manual Viewer

HP t520 Administrator Guide - Page 139

root/Network/Wired/IPv6Enable, root/Network/Wired/Security/Type

Add to My Manuals
Save this manual to your list of manuals

Page 139 highlights

Registry key Description root/Network/Wired/DefaultGateway Sets the default gateway the device will use to communicate with the Internet. Typically this is the IP address of the router. This setting will only take effect when Method is set to Static. root/Network/Wired/EnableDefGatewayAsDNS If set to 1, the default gateway will also be the name server. root/Network/Wired/EthernetSpeed Sets the link speed of the primary Ethernet network interface. Automatic allows the fastest available link speed to be used, which is usually 1 Gbps or 100 Mbps/Full depending on the switch. The link speed can also be forced to a single speed (100 Mbps or 10 Mbps) and duplex mode (Full or Half) to support switches and hubs that do not perform appropriate auto-negotiation. root/Network/Wired/IPAddress Sets the IPv4 address of the thin client. This setting will only take effect when Method is set to Static. root/Network/Wired/IPv6Enable If set to 1, IPv6 is enabled. root/Network/Wired/Interface Sets the default Ethernet interface or NIC. root/Network/Wired/MTU Sets the MTU. It does not matter if the IP address is static or DHCP-acquired. root/Network/Wired/Method If set to Automatic, the thin client will use DHCP to attempt to retrieve network settings. If set to Static, the values of the IPAddress, SubnetMask, and DefaultGateway registry keys are used. HP does not recommend using Static in a generic client profile because it will cause all thin clients to receive the same IP address. root/Network/Wired/Security/CACert Sets the path to CA certificate file. root/Network/Wired/Security/EnableMachineAuth If set to 1, machine authentication for PEAP is enabled. root/Network/Wired/Security/Identity Sets the identity or anonymous identity. root/Network/Wired/Security/InnerAuth Sets the PEAP inner authentication protocol. root/Network/Wired/Security/InnerAuthTTLS Sets the TTLS inner authentication protocol. root/Network/Wired/Security/MachineAuthName Stores the machine account name when machine authentication is enabled. root/Network/Wired/Security/ MachineAuthPassword Stores the machine account password when machine authentication is enabled. root/Network/Wired/Security/PEAPVersion Sets the PEAP version. root/Network/Wired/Security/Password Sets the password. root/Network/Wired/Security/PrivateKey Sets the path to a private key file. This is only used for TLS authentication. root/Network/Wired/Security/Type Sets the 802.1x authentication type. root/Network/Wired/Security/UserCert Sets the path to a user certificate file. This is only used for TLS authentication. root/Network/Wired/Security/Username Sets the username. root/Network/Wired/SubnetMask Sets the subnet mask of the device, such as 255.255.255.0 (for a standard class C subnet). This setting will only take effect when Method is set to Static. Network 127

Section	Page
Getting started	13
Finding more resources	13
Choosing an OS configuration	14
Choosing a remote management service	15
Starting the thin client for the first time	15
Switching between administrator mode and user mode	16
GUI overview	17
Desktop	17
Taskbar	18
Connection Manager (ThinPro only)	19
Connection configuration	20
Advanced connection settings	20
Kiosk mode	21
Connection types	22
Citrix	22
Citrix general settings	22
Options	22
Local Resources	23
Window	23
Firewall	24
Keyboard Shortcuts	24
Session	25
Citrix per-connection settings	25
Connection	25
Configuration	26
Advanced	26
HP True Graphics	26
HP True Graphics server-side requirements	26
XenApp/XenDesktop	26
HDX 3D Pro	27
Verifying server compression options	27
HP True Graphics client-side configuration	27
Compression settings	27
Window settings	27
Monitor layout and hardware limitations	27
Enabling HP True Graphics for multiple monitors on the HP t420	28
RDP	28
RDP general settings	28
RDP per-connection settings	28
Network	28
Service	29
Window	30
Options	30
Local Resources	31
Experience	32
Diagnostics	32
Advanced	33
RemoteFX	33
RDP multi-monitor sessions	33
RDP multimedia redirection	34
RDP device redirection	34
RDP USB redirection	34
RDP mass storage redirection	34
RDP printer redirection	35
RDP audio redirection	36
RDP smart card redirection	36
VMware Horizon View	36
VMware Horizon View per-connection settings	36
Network	36
General	37
Security	37
RDP Options	38
RDP Experience	39
Advanced	40
VMware Horizon View multi-monitor sessions	40
VMware Horizon View keyboard shortcuts	40
VMware Horizon View multimedia redirection	40
VMware Horizon View device redirection	41
VMware Horizon View USB redirection	41
VMware Horizon View mass storage redirection	41
VMware Horizon View printer redirection	41
VMware Horizon View audio redirection	41
VMware Horizon View smart card redirection	42
VMware Horizon View webcam redirection	42
Changing the VMware Horizon View protocol	42
VMware Horizon View HTTPS and certificate management requirements	43
Web Browser	44
Web Browser general settings	44
Web Browser per-connection settings	44
Configuration	44
Advanced	44
Additional connection types (ThinPro only)	45
TeemTalk	45
Configuration	45
TeemTalk Session Wizard	45
Advanced	46
XDMCP	46
Configuration	47
Advanced	47
SSH	47
Configuration	47
Advanced	48
Telnet	48
Configuration	48
Advanced	48
Custom	48
Configuration	48
Advanced	49
Control Panel	50
Peripherals	50
Client aggregation	51
Configuring client aggregation	52
Configuring the aggregation clients	52
Configuring the aggregation server	53
Display preferences	53
Configuring printers	53
Redirecting USB devices	54
Setup	54
Network settings	55
Wired network settings	55
Wireless network settings	56
DNS settings	57
IPSec rules	57
Configuring VPN settings	57
Configuring HP Velocity	58
Customization Center	58
Management	59
Component Manager	59
Removing components	60
Undoing a change	60
Applying the changes permanently	60
HP ThinState	60
Managing an HP ThinPro image	61
Capturing an HP ThinPro image to an FTP server	61
Deploying an HP ThinPro image using FTP or HTTP	61
Capturing an HP ThinPro image to a USB flash drive	62
Deploying an HP ThinPro image with a USB flash drive	62
Managing a client profile	62
Saving a client profile to an FTP server	62
Restoring a client profile using FTP or HTTP	63
Saving a client profile to a USB flash drive	63
Restoring a client profile from a USB flash drive	63
VNC Shadowing	64
Advanced	64
Certificates	65
Certificate Manager	65
SCEP Manager	65
DHCP options	66
System information	67
HP Smart Client Services	68
Supported operating systems	68
Prerequisites for HP Smart Client Services	68
Obtaining HP Smart Client Services	68
Viewing the Automatic Update website	69
Creating an Automatic Update profile	69
MAC-address-specific profiles	69
Updating thin clients	70
Using the broadcast update method	70
Using the DHCP tag update method	70
Example of performing DHCP tagging	70
Using the DNS alias update method	71
Using the manual update method	71
Performing a manual update	71
Profile Editor	72
Opening Profile Editor	72
Loading a client profile	72
Client profile customization	72
Selecting the platform for a client profile	72
Configuring a default connection for a client profile	73
Modifying the registry settings of a client profile	73
Adding files to a client profile	73
Adding a configuration file to a client profile	73
Adding certificates to a client profile	74
Adding a symbolic link to a client profile	74
Saving the client profile	74
Serial or parallel printer configuration	75
Obtaining the printer settings	75
Setting up printer ports	75
Installing printers on the server	75
Troubleshooting	77
Troubleshooting network connectivity	77
Troubleshooting Citrix password expiration	77
Using system diagnostics to troubleshoot	77
Saving system diagnostic data	78
Uncompressing the system diagnostic files	78
Uncompressing the system diagnostic files on Windows-based systems	78
Uncompressing the system diagnostic files in Linux- or Unix-based systems	78
Viewing the system diagnostic files	78
Viewing files in the Commands folder	78
Viewing files in the /var/log folder	79
Viewing files in the /etc folder	79
USB updates	80
HP ThinUpdate	80
BIOS tools	81
BIOS settings tool	81
BIOS flashing tool	81
Resizing the flash drive partition	82
Registry keys	83
Audio	83
CertMgr	84
ConnectionManager	84
ConnectionType	84
custom	84
firefox	87
freerdp	92
ssh	100
teemtalk	105
telnet	107
view	111
xdmcp	118
xen	122
CpuMgr	133
DHCP	134
Dashboard	134
Display	134
Network	136
SCIM	141
ScepMgr	141
Search	142
Serial	143
SystemInfo	143
TaskMgr	144
USB	144
auto-update	145
background	147
config-wizard	147
desktop	148
entries	148
keyboard	148
logging	149
mouse	150
restore-points	150
screensaver	150
security	151
sshd	151
time	151
touchscreen	152
translation	152
usb-update	153
users	153
vncserver	155

Match case Limit results 1 per page

Registry key

Description

root/Network/Wired/DefaultGateway

Sets the default gateway the device will use to communicate with

the Internet. Typically this is the IP address of the router. This

setting will only take

eﬀect

when

Method

is set to

Static

root/Network/Wired/EnableDefGatewayAsDNS

If set to 1, the default gateway will also be the name server.

root/Network/Wired/EthernetSpeed

Sets the link speed of the primary Ethernet network interface.

Automatic

allows the fastest available link speed to be used,

which is usually 1 Gbps or 100 Mbps/Full depending on the switch.

The link speed can also be forced to a single speed (100 Mbps or

10 Mbps) and duplex mode (Full or Half) to support switches and

hubs that do not perform appropriate auto-negotiation.

root/Network/Wired/IPAddress

Sets the IPv4 address of the thin client. This setting will only take

eﬀect

when

Method

is set to

Static

root/Network/Wired/IPv6Enable

If set to 1, IPv6 is enabled.

root/Network/Wired/Interface

Sets the default Ethernet interface or NIC.

root/Network/Wired/MTU

Sets the MTU. It does not matter if the IP address is static or

DHCP-acquired.

root/Network/Wired/Method

If set to

Automatic

, the thin client will use DHCP to attempt to

retrieve network settings. If set to

Static

, the values of the

IPAddress

SubnetMask

, and

DefaultGateway

registry

keys are used. HP does not recommend using

Static

in a

generic client

proﬁle

because it will cause all thin clients to

receive the same IP address.

root/Network/Wired/Security/CACert

Sets the path to CA

certiﬁcate

ﬁle.

root/Network/Wired/Security/EnableMachineAuth

If set to 1, machine authentication for PEAP is enabled.

root/Network/Wired/Security/Identity

Sets the identity or anonymous identity.

root/Network/Wired/Security/InnerAuth

Sets the PEAP inner authentication protocol.

root/Network/Wired/Security/InnerAuthTTLS

Sets the TTLS inner authentication protocol.

root/Network/Wired/Security/MachineAuthName

Stores the machine account name when machine authentication is

enabled.

root/Network/Wired/Security/

MachineAuthPassword

Stores the machine account password when machine

authentication is enabled.

root/Network/Wired/Security/PEAPVersion

Sets the PEAP version.

root/Network/Wired/Security/Password

Sets the password.

root/Network/Wired/Security/PrivateKey

Sets the path to a private key

ﬁle.

This is only used for TLS

authentication.

root/Network/Wired/Security/Type

Sets the 802.1x authentication type.

root/Network/Wired/Security/UserCert

Sets the path to a user

certiﬁcate

ﬁle.

This is only used for TLS

authentication.

root/Network/Wired/Security/Username

Sets the username.

root/Network/Wired/SubnetMask

Sets the subnet mask of the device, such as 255.255.255.0 (for a

standard class C subnet). This setting will only take

eﬀect

when

Method

is set to

Static

Network

127