Hitachi DZ-MV380A Owners Guide - Page 147
No DVD Video Camera/Recorder Operation, Check the Following
View all Hitachi DZ-MV380A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
No DVD Video Camera/Recorder Operation Check the Following: Check 1 No movie can be recorded Movie can be recorded only on DVD-RAM or DVD-R disc. Check the following: • Is DVD-RAM or DVD-R disc inserted? • Is power switch set to " VIDEO"? • Is the DVD-RAM disc in DVD video camera/ recorder write-protected? Release the writeprotect. • Does disc have remaining recording space? If movie still cannot be recorded after the above check is clear, the disc may be damaged: Use another disc. Check 2 No still can be recorded Still can be recorded only on DVD-RAM disc, SD memory card or multimedia card. Check the following: • Is DVD-RAM disc, SD memory card or multimedia card inserted? • Is power switch set to match the recording medium? − When using DVD-RAM disc: Set to " PHOTO". − When using SD memory or multimedia card: Set to " PHOTO". • Is loaded DVD-RAM disc write-protected? • When using SD memory card: Is it locked? • Does disc or card have remaining recording space? If still cannot be recorded after the above check is clear, the disc or card may be damaged: Use another disc or card. Check 3 Skip or search playback does not work well If the temperature inside the DVD video camera/ recorder is high, normal operation may not be possible. Turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again for operation. Check 4 • No operation can be performed because the ACCESS/PC or CARD ACCESS indicator on this DVD video camera/recorder remains lit or blinking. • After disc or card is inserted, it takes some time until recording is possible. In the following cases, it will take more time than usual until operation is possible: • When disc or card is removed and then reinserted • When date changes (e.g., during the first recording of the day) • When the temperature is greatly different from the status of previous recording • When disc with scratches, dirt or fingerprints is inserted • When disc is subject to severe vibrations • When the battery or DC power cord was disconnected instead of following the correct procedure using power switch to turn the DVD video camera/recorder off English 147