Hitachi DZ-MV380A Owners Guide - Page 46
Viewing Subject Through Viewfinder, Viewing Image On Lcd Monitor Screen, Range Where The Lcd Monitor
View all Hitachi DZ-MV380A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
VIEWING SUBJECT THROUGH VIEWFINDER 1 Pull out the viewfinder. 2 Turn the diopter control knob to adjust the focus to suit your eyesight. Diopter control Note: • If the LCD monitor is open approximately 90°, the viewfinder will be off. • Focusing will not be correct unless the viewfinder is pulled out. Pull out the viewfinder. VIEWING IMAGE ON LCD MONITOR SCREEN If you open the LCD monitor, you can monitor subject image on the LCD screen. 1 Open the LCD monitor. The LCD monitor has a portion where you can hook your finger. Hook the finger there to open the monitor. ●Range where the LCD monitor can be moved The LCD monitor can be opened up to approximately 90º. If the LCD monitor is open 90°, it can be tilted with the screen down as much as 90°, and can also be tilted with screen up and turned up to 180° so the screen faces in the same direction as the lens. 90º Hook your finger (Bottom) If the LCD monitor is turned 180° so the screen faces in the same direction as the lens during recording, subject image will also appear in the viewfinder as an mirror image (left/right reversed). Tilt the LCD monitor to adjust its vertical angle so that you can see the screen easily. Note: • Be sure to open the LCD monitor approximately 90º before changing its vertical angle. • Do not record for a prolonged time with the LCD monitor turned approximately 180º in close contact with the DVD video camera/recorder body: Doing this could cause the DVD video camera/recorder and LCD monitor to become hot. 90˚ 180˚ English 46