Hitachi DZ-MV380A Owners Guide - Page 83

USING THE ELECTRONIC IMAGE STABILIZER (EIS) This DVD video camera/recorder is equipped with an electronic image stabilizer function: When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image. 1 Press the MENU button, choose "EIS" on the "Camera Functions Setup" menu screen, and then press the button. Came ra Func t i ons Set u p P r o g r am AE Wh i t e Ba l . EIS On Di g . Zoom Of f MIC.F i l ter ENTER RETURN RAM ●Checking EIS On or Off You can check EIS On or Off by the on-screen information display. EIS 0:00:00 REM 3 0 MIN 2 Choose the "On" or "Off", and then press the button. 3 Press the MENU button to end the setting. FINE 8 : 0 0 AM 9 / 3 0 / 2 00 3 After recording with EIS set to "Off", it is recommended that you return the setting to "On" and then turn the DVD video camera/recorder off, unless you normally record with "Off" setting. This function is effective only during movie recording: It will not work during still recording. Note: • The EIS setting will be stored in memory even when the DVD video camera/recorder is turned off. • Although you can switch EIS between on and off during still recording, the setting will be effective only during movie recording. • It is recommended that you specify "EIS Off" when using the DVD video camera/recorder on a desk or tripod. • When "EIS On" is specified, there will be a slight difference between the actual movement and the movement on screen. • Gross camera shake may not be entirely corrected even if "EIS On" is specified. • EIS may not operate correctly when the tele or wide- conversion lens (generally available) is used. English 83