Hitachi DZHS300A Owners Guide - Page 131
write, such as choosing DVD write drive,
UPC - 050585223851
View all Hitachi DZHS300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
English 7 Click "Authoring" and create a DVD-Video menu. Clicking "Authoring" will display the editing screen of DVD-Video menu. The video file previously imported into PC will appear in "Source". Choose the desired video file, and click "Add titles": The video file will be registered. When using a video file imported into PC using ImageMixer 3, click "File" to choose the folder in which the video file will be stored. Click Clicking "Theme" or "Set title menu" will allow you to change the design of DVD-Video menu. Choose the type of disc to be created (8 cm/ 12 cm/2-layer) using [Set] - [Configuration]. 8 Click "Write" to create a DVD-Video. Clicking "Write" will display the screen for writing. Check "Create disc", perform setting for write, such as choosing DVD write drive, and then set a blank DVD-RW/DVD-R into the drive. Clicking "Preview" will allow you to check any image of DVD to be created. Click Click the "Write" button: The screen for setting write will appear. After checking the settings, click "OK": Writing will start. When write is complete, the drive will open to eject the DVD: Creation of an original DVD is now finished. Note: • If you load a written DVD-RW in the write drive, the dialog "Are you sure you want to delete the content of disc?" will appear. Deleting the content of disc will erase all data on the disc: Carefully check the contents of disc. Choosing "Yes" will display the screen for choosing the disc erasure method: After checking it, click the "OK" button. Once the contents on disc have been deleted, the cover of disc insertion block on DVD video camera/recorder will open. Close the cover following the message instruction. • If the disc contains a video file that does not conform to DVD-Video format, the video will be re-encoded, resulting in deterioration of image quality. • If you execute "File" - "Save project", the halfway operation status can be saved as a project file. Reading in this saved project file will allow you to restart the operation from the saved status. • A project file will be saved in the project folder that was set in step 4 on page 129, and the file name will be automatically attached. • If a video recorded on the HDD in this DVD video camera/recorder for extended hours is too long for one disc, cut-edit the video so that it can be recorded on one disc. See the on-line instruction manual of ImageMixer 3 for cut-editing of videos. To display the ImageMixer 3 manual, choose "Help", and then "Image Mixer Help (F1)", while ImageMixer 3 is being executed. • Since a menu is always added to a recorded video, the data size of the created video will be larger than that of the original video. Click Click 131