Hitachi DZHS300A Owners Guide - Page 152
Press the DISC NAVIGATION button. - dc power cord
UPC - 050585223851
View all Hitachi DZHS300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
English Symptom Cause and Correction Disc cover cannot be closed. Is disc correctly inserted? Was disc inserted from wrong direction? Remove the disc and then reinsert it. Connect a fully charged battery or AC adapter/charger, and then turn the DVD video camera/recorder on. Operating sound is heard cyclically. This sound is heard because the disc is cyclically operated and does not indicate a fault. Some vibrations are felt These vibrations or sound are caused by HDD/disc drive: This or slight sound is heard does not indicate a fault. from mechanism. • No operation can be In the following cases, it will take more time than usual until performed because operation is possible: the ACCESS/PC or • Immediately after a disc or card is reinserted. CARD ACCESS • When a long time has elapsed since the DVD video camera/ indicator on this DVD recorder was turned off last. video camera/ • When the temperature is greatly different from the status of recorder remains lit or previous recording. blinking. • When disc with scratches, dirt or fingerprints is inserted. • After disc or card is • When disc is subject to severe vibrations. inserted, it takes • When the battery or DC power cord was disconnected instead some time until of following the correct procedure using power switch to turn recording is possible. the DVD video camera/recorder off. No image in viewfinder. • Is LCD monitor open? No image will appear in viewfinder unless the LCD monitor is closed and securely locked to DVD video camera/recorder. • Is the DVD video camera/recorder set to the sleep/restart status? Press the SLEEP/RESTART button to release the sleep/restart status. No image appears on the LCD screen or in the viewfinder. • Is DVD video camera/recorder connected to PC using PC connection cable? Unplug the PC connection cable. • Does DVD video camera/recorder stop at the end of the scene to which wipe-out was set and played back? Press the DISC NAVIGATION button. • Is the DVD video camera/recorder set to the sleep/restart status? Press the SLEEP/RESTART button to release the sleep/restart status. Reference page 40 28, 30 - - 8, 40 34, 45 45, 88, 123 152