Hitachi DZHS300A Owners Guide - Page 147
During recording
UPC - 050585223851
View all Hitachi DZHS300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
English Symptom Cause and Correction Power cannot be turned Detach the battery or AC adapter/charger once, and then press the off. RESET button of DVD video camera/recorder: Reattach a power supply to DVD video camera/recorder before turning it on again. Even if the DVD video camera/recorder is off, opening the cover will cause the ACCESS/PC indicator to blink. The DVD video camera/recorder will automatically turn on to recognize a disc: Closing the cover will automatically turn the DVD video camera/recorder off. Reference page 28, 30, 153 41 During recording Symptom Cause and Correction Pressing the REC button will not start recording. • Is input image copy-guarded? • Is a finalized disc in the DVD video camera/recorder? • Is proper type of disc inserted? • Is power switch set to match the recording medium? • Is the HDD or disc write-protected? • Does HDD or disc have remaining recording space? Recording starts but stops immediately. Is disc scratched or does dirt or fingerprint adhere to it? Clean the disc. If there is still no improvement, replace the disc. Is some other AV device directly connected to the video/audio input/output jack of this DVD video camera/recorder? If the AV device is connected via several other devices, such as AV selector, the video signal may not be transmitted incorrectly. In such a case, reduce the number of devices through which the video signal is transmitted, or connect AV device directly. Are you attempting to record image from video game or PC? From some video games or PCs, image cannot be recorded on this DVD video camera/recorder. No photo can be recorded • Is proper type of card inserted? • Is power switch set to "SD"? • Is the card locked? • Does the card have remaining free space? LCD screen is hard to Has brightness of LCD screen been adjusted? see. Stop recording and adjust the brightness. Is the DVD video camera/recorder being used outdoors? Use the viewfinder. When using LCD monitor, adjust its angle so that LCD screen is not exposed to direct sunlight. Unevenness appears on Did you press the LCD monitor or the area around it? LCD monitor screen. If the LCD monitor is pressed, some unevenness will occur. Release your hand and leave the LCD monitor for a while: Normal display will be restored. Focus is not correct. Is it difficult to use auto focus with your subject? Focus manually. Does manual focus icon appear? The DVD video camera/recorder is set to manual focus. Focus the subject manually, or release manual focus. Is the diopter control correctly adjusted if you are using the viewfinder as a monitor? Adjust the diopter control. In cases other than the above, set the power switch to "OFF", and then set it to "HDD", "DVD" or "SD" again. Reference page 26, 33, 106, 108 11 115 - 27, 33, 106 38 34 - 56 55 34 33 147