Hitachi DZHS300A Owners Guide - Page 59

English 3 Built-in Video Flash (for DZ-HS303A only) When recording photos in a dark place, or if the subject is lit from rear, the DZ-HS303A makes use of the built-in Video Flash for automatic brightening: The Video Flash can also be set to On where the light is always being emitted, or Off when you wish to record without using the flash even in a dark place. Setting Auto On On-screen display Manner of emitting light ( when the PHOTO/SELECT button Automatically emits light in dark place or in a spot lit is pressed from rear. ( Always emits light regardless of brightness. Off ) No light emission. 1 Press the MENU button, and choose "Flash" from the "Camera Functions Setup" menu. 2 Choose the option for "Flash" and decide it. 3 Press the MENU button to end the setting. * * Displayed when using DZ-HS303A to record photo (not displayed when the optional Video Flash is connected). Came ra Func t i ons Set u p P r o g r am AE Auto Wh i t e Ba l . On Di g . Zoom Off F l ash ENTER RETURN REM 3 9 4 8 : 0 0 AM 1 2 / 1/2006 ●Optional Video Flash (for DZHS303A only) See "Introduction to Optional Accessories" on page 138. You can use the optional DZ-FLH3 Video Flash* (p. 138): Refer to the instruction manual of Video Flash for use. * Unavailable for DZ-HS300A. Note: • The built-in Video Flash setting will not change even when the DVD video camera/recorder is turned off. Unless recording is to be made with the fixed Flash setting, it is recommended to return it to "Auto" after recording with the "On" or "Off" setting, before turning the DVD video camera/recorder off. • When recording dark subjects, the shutter speed will be slower, so don't let the camera shake. • However, dark subjects may not be in clear focus even if the Video Flash is used. It is recommended that you light a subject when recording in a dark place. • The Video Flash built into DZ-HS303A cannot be used when a conversion lens is attached: Specify "Flash: Off" • The distance for the built-in Video Flash to adjust the appropriate amount of light will vary depending on the subject, but it is approximately 3.2 - 8.2 feet (1 - 2.5 m). • The Video Flash automatically adjusts the amount of light emitted, but the light amount adjustment may be insufficient when a subject is too far away or too near. • If you continuously record using the Flash, the Flash may not emit light or the amount of light may not be adjustable. After recording using the Flash, it is recommended that you wait for a few moments, before pressing the PHOTO/SELECT button to record. • " ( " will blink during charging of the battery for Video Flash. • While " ( " is flashing, the video flash will not emit light, though the DVD camera/recorder is recording. • When recording a close-up photo, specify "Flash: Off". Using the flash too near subject could cause a whitish image. • Do not use the Video Flash when approaching the human eye. Emitting light from Video Flash near human eye could damage the subject's eyesight. Especially when recording a baby or small child, move the DVD video camera/recorder at least 3.2 feet (1 m) away. • Do not use the Video Flash while pointing it at a driver in vehicle: Doing so could dazzle the driver, causing an accident. • Do not use the Video Flash in a place where there is flammable or explosive gas: Doing so could cause fire or explosion. • When the DZ-FLH3 optional video flash is attached to DZ-HS303A, the built-in video flash in DZ-HS303A will not operate. 59