Hitachi DZHS300A Owners Guide - Page 83
Dubbing on DVD
UPC - 050585223851
View all Hitachi DZHS300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
English Dubbing on DVD You can dub the images recorded on the HDD to a DVD. Before You Begin • Set the power switch to "HDD". • Prepare a recordable disc. • The recording time for a scene that can be dubbed on one disc is approx. 30 minutes ( in FINE mode). If the HDD contains a scene exceeding the length that is recordable on one disc, it cannot be dubbed: Divide the scene (see p. 86), and then perform dubbing. • Be sure to use the AC adapter/charger to power the DVD video camera/ recorder during dubbing: Dubbing is not possible with a battery connected. • If power is turned off and dubbing is interrupted midway, proper dubbing will not be possible. DUBBING ALL SCENES RECORDED ON HDD (DUBBING ALL) You can dub all scenes recorded on the HDD to a disc from the beginning in sequence. If the scenes cannot be included on one disc, count the capacity size of scenes, and dub the scenes that can be stored on the disc. Replace the disc during dubbing, following the screen for replacing disc: Dubbing will restart from the following scene. This operation will be repeated until all scenes on the HDD are dubbed. 1 Press the DUBBING button. "Please insert DVD." will appear. Press the DISC EJECT button, and then insert a disc. Press the DISC NAVIGATION button, then the MENU button, and choose "Scene", "Dubbing" and "All": The same screen will appear. 2 The screen for verification will appear: Choose "YES", and then press the A button. "Dubbing scenes to DVD?" will appear. To stop dubbing, choose "NO", or press C (STOP/EXIT). If you press the f button at this time, you can confirm the scenes to be dubbed, which will be enclosed in red cursor. Press C (STOP/EXIT) to restore the screen for verification. Dubbing (All) Dubbing scenes to DVD? YES NO ENTER CHECK SCENE Press f Press C Dubbing (All) RETURN 3 Replace the disc. If one disc cannot contain all scenes, the screen for verifying disc replacement will appear. To continue dubbing, press the DISC EJECT button, and then replace the disc. To stop dubbing, press C (STOP/EXIT). 4 After dubbing is finished, check the "Delete Scene" screen. Choosing "YES" will delete the dubbed scenes from the HDD. To retain the dubbed scenes on the HDD, choose "NO". 5 Press the DISC EJECT button to remove the disc. Close the cover of disc insertion block. Press C (STOP/EXIT) to end dubbing. Note: • If message "Scene No.xxx is too large. Please divide this Scene before dubbing." appears during dubbing, the dubbing will stop. Divide the specified scene (see page 86). After dividing the scene, use "scene select dubbing" to dub subsequent scenes. 83