Hitachi HTS541680J9SA00 Specifications - Page 154
Write Log Ext 3Fh
View all Hitachi HTS541680J9SA00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Travelstar 5K160 (SATA) Hard Disk Drive Specification 14.48 Write Log Ext (3Fh) Command Block Output Registers Command Block Input Registers Register 7 6 5 4 3 2 1 0 Register 76543210 Data Low Data Low -------- Data High Data High -------- Feature Current Error ...See Below... Previous Sector Count Current V V V V V V V V Sector Count HOB=0 Previous V V V V V V V V HOB=1 LBA Low Current V V V V V V V V LBA Low HOB=0 Previous HOB=1 LBA Mid Current V V V V V V V V LBA Mid HOB=0 Previous V V V V V V V V HOB=1 LBA High Current LBA High HOB=0 Previous HOB=1 Device Device -------- Command 0 0 1 1 1 1 1 1 Status ...See Below... Error Register Status Register 7 65432 1 0 7 654 3 2 1 0 CRC UNC 0 IDN 0 ABT T0N AMN BSY RDY DF DSC DRQ COR IDX ERR V V0V0V 0 0 0 V0V - 0 0 V Figure 103 Write Log Ext Command This command writes a specified number of 512 byte data sectors to the specific log. The device shall interrupt for each DRQ block transferred. Output Parameters To The Device Sector Count Current The number of sectors to be written to the specified log low order, bits (7:0). Sector Count Previous The number of sectors to be written to the specified log high orders, bits (15:8). If the number of sectors is greater than the number indicated in the Log directory, which is available in Log number zero, the device shall return command aborted. The log transferred to the device shall be stored by the device starting at the first sector in the specified log. Sector Number Current The log to be written as described in Figure 51 Log address definition. If the host attempts to write to a read only log address, the device shall return command aborted. Cylinder Low Current The first sector of the log to be written low order, bits (7:0). Cylinder Low Previous The first sector of the log to be written high order, bits (15:8) If the feature set associated with the log specified in the Sector Number register is not supported or enabled, or if the values in the Sector Count, Sector Number or Cylinder Low registers are invalid, the device shall return command aborted. If the host attempts to write to a read only log address, the device shall return command aborted. 154/167