Hitachi HTS541680J9SA00 Specifications - Page 159
Write Sectors 30h/31h
View all Hitachi HTS541680J9SA00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Travelstar 5K160 (SATA) Hard Disk Drive Specification 14.53 Write Sector(s) (30h/31h) Command Block Output Registers Register 76543210 Data -------- Feature -------- Sector Count VVVVVVVV LBA Low VVVVVVVV LBA Mid VVVVVVVV LBA High VVVVVVVV Device - L - - HHHH Command 0 0 1 1 0 0 0R Command Block Input Registers Register 76543210 Data -------- Error ...See Below... Sector Count VVVVVVVV LBA Low VVVVVVVV LBA Mid VVVVVVVV LBA High VVVVVVVV Device - - - - HHHH Status ...See Below... Error Register 7 6 5 4 3 2 1 0 CRC UNC 0 IDN 0 ABT T0N AM N 000V0V0 0 Figure 108 Write Sector(s) Command (30h/31h) Status Register 7 6543 2 10 BSY RDY DF DSC DRQ COR IDX ERR 0 VVV - 0 0 V The Write Sector(s) command transfers one or more sectors from the host to the device, then the data is written to the disk media. The sectors are transferred through the Data Register 16 bits at a time. If an uncorrectable error occurs, the write will be terminated at the failing sector, when the auto reassign function is disable. Output Parameters To The Device Sector Count The number of continuous sectors to be transferred. If zero is specified, then 256 sectors will be transferred. LBA Low The sector number of the first sector to be transferred. (L=0) In LBA mode, this register contains LBA bits 0 - 7. (L=1) LBA High/Mid The cylinder number of the first sector to be transferred. (L=0) In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1) H The head number of the first sector to be transferred. (L=0) In LBA mode, this register contains LBA bits 24 - 27. (L=1) R The retry bit, but this bit is ignored. Input Parameters From The Device Sector Count The number of requested sectors not transferred. This will be zero, unless an unrecoverable error occurs. LBA Low LBA High/Mid H The sector number of the last transferred sector. (L=0) In LBA mode, this register contains current LBA bits 0 - 7. (L=1) The cylinder number of the last transferred sector. (L=0) In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1) The head number of the last transferred sector. (L=0)In LBA mode, this register contains current LBA bits 24 - 27. (L=1) 159/167