Hitachi HTS541680J9SA00 Specifications - Page 72
Set Max ADDRESS command - compatible
View all Hitachi HTS541680J9SA00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Travelstar 5K160 (SATA) Hard Disk Drive Specification H Head number. Indicates that the head number part of the Device Register is an output parameter and should be specified. L LBA mode. Indicates the addressing mode. Zero specifies CHS mode and one does LBA addressing mode. R Retry. Original meaning is already obsolete, there is no difference between 0 and 1. (Using 0 is recommended for future compatibility.) B Option Bit. Indicates that the Option Bit of the Sector Count Register should be specified. (This bit is used by Set Max ADDRESS command) V Valid. Indicates that the bit is part of an output parameter and should be specified. x Indicates that the hex character is not used. - Indicates that the bit is not used. Input Registers 0 Indicates that the bit is always set to 0. 1 Indicates that the bit is always set to 1. H Head number. Indicates that the head number part of the Device Register is an input parameter and will be set by the device. V Valid. Indicates that the bit is part of an input parameter and will be set to 0 or 1 by the device. N Not recommendable condition for start up. Indicates that the condition of device is not recommendable for start up. - Indicates that the bit is not part of an input parameter. The command descriptions show the contents of the Status and Error Registers after the device has completed processing the command. 72/167