Hitachi HTS541680J9SA00 Specifications - Page 88

Travelstar 5K160 (SATA) Hard Disk Drive Specification enabled 3 (=x) 1=Advanced Power Management Feature Set enabled 2 (=0) 1=CFA Feature Set supported 1 (=0) 1=READ/WRITE DMA QUEUED command supported 0 (=1) 1=DOWNLOAD MICROCODE command supported 87 4163H Command set/feature enabled 15 (=0) Always 14 (=1) Always 13 (=0) 1=IDLE IMMEDIATE with UNLOAD FEATURE supported 12- 11 (=0) Reserved 10 (=0) 1=URG bit supported for WRITE STREAM DMA EXT and WRITE STREAM EXT 9 (=0) 1=URG bit supported for READ STREAM DMA EXT and READ STREAM EXT 8 (=1) 1=64 bit World wide name supported 7 (=0) 1=WRITE DMA QUEUED FUA EXT command supported 6 (=1) 1=WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT command supported 5 (=1) 1=General Purpose Logging feature set supported 4- 2 (=0) Reserved 1 (=1) 1=SMART self-test supported 0 (=1) 1=SMART error logging supported 88 xx3FH Ultra DMA Transfer mode (mode 5 supported) 15 (=0) Reserved 14 (=0) 1=UltraDMA mode 6 is selected 13 (=x) 1=UltraDMA mode 5 is selected 12 (=x) 1=UltraDMA mode 4 is selected 11 (=x) 1=UltraDMA mode 3 is selected 10 (=x) 1=UltraDMA mode 2 is selected 9 (=x) 1=UltraDMA mode 1 is selected 8 (=x) 1=UltraDMA mode 0 is selected 7 (=0) Reserved 6 (=0) 1=UltraDMA mode 6 is supported **5 (=1) 1=UltraDMA mode 5 is supported **4 (=1) 1=UltraDMA mode 4 is supported **3 (=1) 1=UltraDMA mode 3 is supported **2 (=1) 1=UltraDMA mode 2 is supported **1 (=1) 1=UltraDMA mode 1 is supported 0 (=1) 1=UltraDMA mode 0 is supported Note.1 The '*' mark in 'Content' field indicates the use of those parameters that are vendor specific. Note.2 The feature marked '**' is able to be unsupported by the Device Configuration Overlay command. Figure 38 Identify device information --- Continued --- 89 xxxxH Time required for security erase unit completion Time= value(xxxxh)*2 [minutes] 90 0000H Time required for Enhanced security erase completion 0000 : Not supported 91 40xxH Current Advanced Power Management level 88/167