Hitachi HTS541680J9SA00 Specifications - Page 87
S.M.A.R.T Feature Set enabled
View all Hitachi HTS541680J9SA00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Travelstar 5K160 (SATA) Hard Disk Drive Specification 14 (=1) Always 13 (=0) 1=IDLE IMMEDIATE with UNLOAD FEATURE supported 12- 11 (=0) Reserved 10 (=0) 1=URG bit supported for WRITE STREAM DMA EXT and WRITE STREAM EXT 9 (=0) 1=URG bit supported for READ STREAM DMA EXT and READ STREAM EXT 8 (=1) 1=64-bit World wide name supported 7 (=0) 1=WRITE DMA QUEUED FUA EXT command supported 6 (=1) 1=WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands supported 5 (=1) 1=General Purpose Logging feature set supported 4- 2 (=0) Reserved **1 (=1) 1=SMART self-test supported **0 (=1) 1=SMART error logging supported 85 74xxH Command set/feature enabled 15 (=0) Obsolete 14 (=1) 1=NOP command supported 13 (=1) 1=READ BUFFER command supported 12 (=1) 1=WRITE BUFFER command supported 11 (=0) Reserved **10 (=1) 1=Host Protected Area Feature Set supported 9 (=0) 1=DEVICE RESET command supported 8 (=0) 1=SERVICE interrupt enabled 7 (=0) 1=release interrupt enabled 6 (=x) 1=look-ahead enabled 5 (=x) 1=write cache enabled 4 (=0) 1=supports PACKET Command Feature Set 3 (=1) 1=supports Power Management Feature Set 2 (=0) 1=supports Removable Media Feature Set 1 (=x) 1=Security Feature Set enabled 0 (=x) 1=S.M.A.R.T Feature Set enabled Note.1 The '*' mark in 'Content' field indicates the use of those parameters that are vendor specific. Note.2 The feature marked '**' is able to be unsupported by the Device Configuration Overlay command. Figure 37 Identify device information --- Continued --- 86 3xxxH Command set/feature enabled * 15- 14 (=0) Reserved 13 (=1) 1=FLUSH CACHE EXT command supported 12 (=1) 1= FLUSH CACHE command supported 11 (=x) 1=Device Configuration Overlay supported * 10 (=1) 1= 48-bit Address feature set supported 9 (=x) 1=Automatic Acoustic Management enabled 8 (=x) 1=SET MAX security extension enabled 7 (=0) Reserved 6 (=1) 1=SET FEATURES subcommand required to spin-up 5 (=x) 1=Power-Up In Standby feature set has been enabled via the SET FEATURES command 4 (=0) 1=Removable Media Status Notification Feature Set 87/167