Hoover UH30065 Manual - Page 12

Secondary filter C CB 36 Align new filter bag collar (B) with tray (C). Slide bag collar all the way into tray. The bag collar opening will be sealed to the dirt tube opening. Tuck in filter bag inside the bag cavity. Close bag door. A 37 Disconnect cleaner from electrical outlet. Do not use cleaner without secondary or final filter in place. The secondary filter, located within the grill (A) in the bottom of the bag compartment, protects the motor from dirt particles. If filter becomes dirty, slide grill out and remove filter. Hand wash filter with mild detergent and cold water. Rinse and let filter air dry completely before repositioning in grill. Align grill on tracks and slide in until it snaps into position. Should you want to replace this filter, ask for HOOVER part No. 38765031. Headlight Headlight replacement What to buy This cleaner uses a T3 1/4 wedge base bulb, HOOVER part no. 27313107. Disconnect cleaner from electrical outlet. Press on handle release pedal and lower the nozzle so it is flat. Remove bag door (Fig. 32). Remove lens 38 Using a Phillips screwdriver, remove the three screws as shown and lift off lens. Pull old bulb straight out of socket. Replace lens 39 Push new bulb straight into socket until locked in place. Do not twist bulb. Excessive force is not required. Reposition lens and secure with the three screws. 12