Hoover UH30065 Manual - Page 14

F B 45 Grasp agitator brush roll firmly and fit it into position by first slid- ing end opposite the belt into the rectan- gular slot (F) on side of the cleaner. Pull other side of agitator brush roll into place. Turn agitator brush roll making sure belt is not pinched between agitator brush roll and agitator brush roll shield. 46 Reposition bottom plate and five screws. Tighten screws securely. Agitator brush roll belt The agitator brush roll belt is designed to last the lifetime of the cleaner. It typically should not need replacement. If you feel the agitator brush roll belt needs to be checked or replaced, take your cleaner to an Authorized Hoover Sales and Service Center. Do not attempt to remove the agitator brush roll belt. Powered pet hair cleaning tool Agitator brush roll B When agitator brush roll brushes on the powered pet hair cleaning tool are worn, the agitator brush roll should be replaced. Ask for HOOVER part No. 48414088. How to replace A 48 2. Unscrew the two Phillips screws and remove belt guard (B). 47 1. Remove tool from hose and turn it so bottom faces up. Press the latches on either side of tool and remove bottom plate (A). 14 C 49 3. Remove agitator brush roll including end plates (C) and discard. 4. Inspect belt to ensure that it is in good condition. If belt is cracked, gouged or broken, replace it (see following section).