Husqvarna 540i XP with battery and charger Owner Manual - Page 16

To connect the battery charger, To connect the battery to the battery charger, Accessories

Get Husqvarna 540i XP with battery and charger PDF manuals and user guides View all Husqvarna 540i XP with battery and charger manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

to the oil pump, the guide bar and the saw chain. WARNING: The saw chain can break if the lubrication of the cutting equipment is not sufficient. Risk of serious injury or death to the operator. WARNING: Use the correct chain oil for this function to operate correctly. Speak to your servicing dealer when you select your chain oil. • Use Husqvarna chain oil for maximum saw chain life and to prevent negative effects on the environment. If Husqvarna chain oil is not available, we recommend you to use a standard chain oil. • Use a chain oil with good adherence to the saw chain. • Use a chain oil with correct viscosity range that agrees with the air temperature. CAUTION: In temperatures below 0°C/32°F some chain oils become too thick, which can cause damage to the oil pump components. • Use the recommended cutting equipment. Refer to Accessories on page 35. • Remove the cap to the chain oil tank. • Fill the chain oil tank with chain oil. • Attach the cap carefully. To connect the battery to the battery charger Note: Charge the battery if it is the first time that you use it. A new battery is only 30% charged. 1. Make sure that the battery is dry. 2. Put the battery in the battery charger. 3. Make sure that the green charging light on the battery charger comes on. That means that the battery is connected correctly to the battery charger. 4. When all LEDs on the battery come on, the battery is fully charged. ABCD Note: To see where the chain oil tank is on you product, refer to Product overview on page 2. To connect the battery charger 1. Connect the battery charger to the voltage and frequency that is specified on the rating plate. 2. Put the plug in a grounded socket outlet. The LED on the battery charger flashes green one time. Note: The battery does not charge if the battery temperature is more than 50 °C/122 °F. If the temperature is more than 50 °C/122 °F, the battery charger makes the battery become cool before the battery charges. 5. To disconnect the battery charger from the mains socket, pull the plug. Do not pull the cable. 6. Remove the battery from the battery charger. Note: Refer to the battery and battery charger manuals for more information. 16 1065 - 007 - 27.09.2021

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
to the oil pump, the guide bar and the saw
chain.
WARNING:
The saw chain can break if
the lubrication of the cutting equipment is
not sufficient. Risk of serious injury or death
to the operator.
WARNING:
Use the correct chain oil
for this function to operate correctly. Speak
to your servicing dealer when you select
your chain oil.
•
Use Husqvarna chain oil for maximum saw chain life
and to prevent negative effects on the environment.
If Husqvarna chain oil is not available, we
recommend you to use a standard chain oil.
•
Use a chain oil with good adherence to the saw
chain.
•
Use a chain oil with correct viscosity range that
agrees with the air temperature.
CAUTION:
In temperatures below
0°C/32°F some chain oils become too
thick, which can cause damage to the oil
pump components.
•
Use the recommended cutting equipment. Refer to
Accessories on page 35
.
•
Remove the cap to the chain oil tank.
•
Fill the chain oil tank with chain oil.
•
Attach the cap carefully.
Note:
To see where the chain oil tank is on you
product, refer to
Product overview on page 2
.
To connect the battery charger
1.
Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2.
Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
Note:
The battery does not charge if the battery
temperature is more than 50 °C/122 °F. If the
temperature is more than 50 °C/122 °F, the battery
charger makes the battery become cool before the
battery charges.
To connect the battery to the battery
charger
Note:
Charge the battery if it is the first time that you
use it. A new battery is only 30% charged.
1.
Make sure that the battery is dry.
2.
Put the battery in the battery charger.
3.
Make sure that the green charging light on the
battery charger comes on. That means that the
battery is connected correctly to the battery charger.
4.
When all LEDs on the battery come on, the battery is
fully charged.
A
B
C
D
5.
To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6.
Remove the battery from the battery charger.
Note:
Refer to the battery and battery charger
manuals for more information.
16
1065 - 007 - 27.09.2021