Husqvarna 540i XP with battery and charger Owner Manual - Page 18
To use the SavE function, To stop the product, Pull stroke and push stroke
View all Husqvarna 540i XP with battery and charger manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3. Put the battery in the battery holder. 2. Push the SavE button again to disconnect the function. The green LED goes off. To stop the product 1. Push and hold the start/stop button until the green LED light goes off. CAUTION: Make sure that the battery is installed correctly into the battery holder. If the battery does not move easily into the battery holder, the position is not correct. 4. Push on the lower part of the battery until you hear a click sound. 2. Push the battery release buttons and remove the battery from the battery holder to prevent accidental start. 5. Push and hold the start/stop button until the green LED light comes on. To use the SavE function The SavE function decreases the chain speed and the power of the product. 1. Push the SavE button. The green LED comes on. Pull stroke and push stroke You can cut through wood with the product in 2 different positions. • To cut on the pull stroke is when you cut with the bottom of the guide bar. The saw chain pulls through the tree when you cut. In this position you have better control of the product and the position of the kickback zone. 18 1065 - 007 - 27.09.2021