Husqvarna 540i XP with battery and charger Owner Manual - Page 26
Maintenance and checks of the safety devices on the product, To do a check of the front hand guard
View all Husqvarna 540i XP with battery and charger manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Maintenance Clean the external parts of the product. Make sure that the power trigger and the power trigger lockout function correctly from a safety point of view. Clean the chain brake and make sure that it operates safely. Make sure that the chain catcher is not damaged. Replace it if necessary. Turn the guide bar for more equal wear. Make sure that the lubrication hole in the guide bar is not clogged. Clean the bar groove. Make sure that the cutter and cutter guard have no cracks and that they are not damaged. Replace the cutter or cutter guard if they have cracks or if they have been exposed to impact. Make sure that the guide bar and saw chain have sufficient oil. Do a check of the saw chain. Look for cracks and make sure that the saw chain is not rigid or unusually worn. Replace if necessary. Sharpen the saw chain. Do a check of its tension and condition. Do a check for wear on the drive sprocket and replace is necessary. Clean the air inlet on the product. Make sure that the screws and nuts are tight. Make sure that the keypad works correctly and that it is not damaged. Use a file to remove burrs from the edges of the guide bar. Do a check of the connections between the battery and the product. Do a check of the connection between the battery and the battery charger. Empty and clean the oil tank. Blow through the product and battery cooling slots gently with compressed air. Before use X X X X X X X X X X X Weekly Monthly X X X X Maintenance and checks of the safety devices on the product To do a check of the front hand guard Regularly do a check of the front hand guard and the inertia brake release. 1. Make sure that the front hand guard is not damaged and that there are no defects, such as cracks. 2. Make sure that the front hand guard moves freely and that it is attached safely to the product. 3. Put the product, with the motor off, on a stump or other stable surface. 26 1065 - 007 - 27.09.2021