Husqvarna 540i XP with battery and charger Owner Manual - Page 9
Personal protective equipment
View all Husqvarna 540i XP with battery and charger manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
• Do not use the product above shoulder height and do not try to cut with the guide bar tip. move the product. Always stop the motor before you move from tree to tree. • Do not use a product in a situation where you can not call for help if an accident occur. • Stop the product and engage the chain brake before you move the product. Hold the product with the guide bar and saw chain pointing rearward. Put on a transportation guard on the guide bar before transportation or before you move it for any distance. • When you put the product on the ground, engage the chain brake and have a constant view of the product. Stop the product and remove the battery before you leave your product for any length of time. • There is a risk that wood chips get stuck in the drive system. This can cause the saw chain to get stuck. Always stop the product and remove the battery before you clean it. • The vibration level increases if you cut with cutting equipment that is incorrect or not correctly sharpened. Cutting hardwoods, such as broadleaf trees, causes more vibration than cutting softwoods, such as conifers. • Do not fell a tree is there is any risk that it endangers any person, strike or cause any utility line, or cause property damage. If the tree strikes a utility line, the utility company must be notified immediately. • Make sure that you can move around safely. Examine the conditions and the terrain around you for possible obstacles such as roots, rocks, branches, ditches and more. Be careful when you do work on sloping ground. • Prevent situations which you think is beyond your capability. • It is not possible to include each possible situation you can face when you use this product. Always be careful and use your common sense. • Overexposure to vibration can lead to circulatory damage or nerve damage in persons who have decreased circulation. Speak to your physician if you experience symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms usually occur in the fingers, hands or wrists increases in cold temperatures. • Do not try a pruning or limbing operation in a standing tree unless you have special training. • Always stand on the uphill side of the log when you cut on a slope as the tree is likely to roll or slide downhill after it is felled. To maintain complete control of the product when you cut, release the cutting pressure near the end of the cut. Do not relax your hands around the handles. Do not let the saw chain to touch the ground. After you have completed the cut, wait for the saw chain to stop before you Personal protective equipment WARNING: Read the warning instructions that follow before you use the product. • Most chainsaw accidents occur when the saw chain touches the operator. You must use approved personal protective equipment during operation. 1065 - 007 - 27.09.2021 9