Husqvarna AUTOMOWER 430XH Owner Manual
Husqvarna AUTOMOWER 430XH Manual
 |
View all Husqvarna AUTOMOWER 430XH manuals
Add to My Manuals
Save this manual to your list of manuals |
Husqvarna AUTOMOWER 430XH manual content summary:
- Husqvarna AUTOMOWER 430XH | Owner Manual - Page 1
Operator's manual HUSQVARNA AUTOMOWER® 430XH/450XH Read the operator's manual carefully and make sure that you understand the instructions before you use the product. EN, English - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 2
Contents 1 Introduction 1.1 Support 3 1.2 Product description 3 1.3 Product General safety instructions 11 2.3 Safety instructions for operation wire or the guide wire 22 3.7 To extend the boundary wire or the guide wire 22 3.8 service 39 6 Troubleshooting 6.1 Introduction - troubleshooting - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 3
your product on www.husqvarna.com. 1.1 Support For support about the Husqvarna product, speak to your servicing dealer. The operator selects the operation settings Collection of grass is not necessary. The boundary wire and the guide wire controls the movement of the product within the work area. - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 4
. Measurement gauge when installing the boundary wire (the measurement gauge is broken loose from the box) 24. Screws for securing the charging station 25. Operator's Manual and Quick Guide 26. Alarm decal 27. Extra blades 28. Low voltage cable 4 - Introduction 1230 - 001 - - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 5
guide wire 2 31. Stakes 3 32. Connectors for the loop wire 4 1.4 Symbols on the product These symbols can be found on the product. Study them carefully. WARNING: Read the user instructions reasons the chassis shall only be opened by authorized service technicians. A broken seal can result in the - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 6
problems. The GPS-supported navigation is active. Flashes as it collects GPS information. The weather timer function automatically adapts the cutting intervals to the grass growth. The installation function for manual the symbol flashes. Read the user instructions. Do not discard the battery into - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 7
1.7 Menu structure overview 1 Timer Overview Timer settings Overview (per day) Period 1 Period 2 Copy to Reset All Mo Tu We Th Fr Sa Su days Current All week day Cutting height Cutting height Security Security level Advanced Low Medium High Custom New loop Change signal PIN code - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 8
time Low Medium High Installation Lawn coverage GPS Auto Find charging station Overview of search method Advanced Overview of lawn coverage Area 1-5 Guide Boundary Charger Delay time Disable More Charging station range How? How How Disable More far? often? Test Reset Test Test Reset - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 9
1.9 Menu structure overview 3 Settings Profiles Use Profile A, B or C ECO mode Use Spiral cutting Use Slope control Use General Time & date Language Country & Timezone Reset all About user setting Select Rename Save Intensity Set time Set date Time format Date format Low- Low Medium - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 10
1.10 Display The display on the product shows information and settings of the product. To access the display, push the STOP button. 1.11 Keypad The keypad on the product let the operator navigate in the menu of the product. To access the keypad, push the STOP button. 3 24 1 5 6 7 1. The START - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 11
if there is a risk of damage to the product, other materials or the adjacent area if the instructions in the manual are not obeyed. 2.2 General safety instructions The following system is used in the Operator's Manual to make it easier to use: • Text written in italics is a text that is shown on - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 12
and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Local regulations may restrict the age of the operator - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 13
are fully conversant with its special characteristics and safety regulations. Please read the Operator's Manual carefully and make sure you understand the instructions before using the product. 2.3 Safety instructions for operation 2.3.1 Use • It is not permitted to modify the original design of - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 14
• Start the product according to the instructions. When the main switch is set to 1; make sure to keep your hands and feet away from the rotating blades. Never put your hands and - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 15
is a risk of a thunderstorm. 1. Mark the wires to simplify reconnecting. The charging station's connections are marked AR, AL and G1. Some models have additional guide wires (G2, G3). 2. Disconnect all connected wires and the power supply. 3. Connect all the wires and the power supply if there is no - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 16
the charging station in an area with protection from the sun. • If the charging station is installed on an island, make sure to connect the guide wire to the island. Refer to To make an island on page 18. Note: Holes with water in the lawn can cause damage to the - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 17
is a risk of electrical shock. recommended to make an eyelet where the guide wire will be connected. Make the eyelet with approximately 20 cm / 8 : Make a blueprint of the work area before you install the boundary wire and guide wire. E D F C A 3.3.3 To examine where to put the boundary - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 18
and that connects 2 work areas. The passage must be a minimum of 60 cm / 24 in. wide. Note: If a passage is less than 2 m / 6.5 ft. wide, install a guide wire through the passage. 3.3.3.3 To make an island • Put the boundary wire to and around the obstacle to make an island. • Put the 2 sections of - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 19
The work area with the charging station is the main area (A). Note: The product must be manually moved between the main area and the secondary area. 3.3.4 To examine where to put the guide wire • Put the guide wire in a line at a minimum of 2 m / 7 ft. in front of the charging station. • Make sure - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 20
regulations about electrical safety. 1. Read and understand the instructions about the charging station. Refer to To examine where are connected by a narrow passage (B), you can set the product to leave the guide wire after a certain distance (C). The settings can be changed in Lawn coverage on - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 21
position with stakes on page 22 or To bury the boundary wire or the guide wire on page 22. 7. Connect the wires to the charging station. Refer to To install the boundary wire on page 21 and To install the guide wire on page 21. 8. Attach the charging station to the ground with the - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 22
mallet. CAUTION: Make sure that the stakes hold the boundary wire and the guide wire against the ground. Note: The wire is overgrown with grass and not visible is necessary to install the extension. 3. Put the boundary wire or the guide wire into position. 4. Put the wire ends into a coupler. Note: Make - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 23
hatch. Note: Some models require a factory PIN code before the selection of personal PIN code. Note: Use the MEMO page at the beginning of the manual to make a note of the PIN code. Introduction on page 3. The product then moves away from the charging station and stops, while it calibrates some - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 24
For more information about the operating modes Start, Park and Pause, see Operation on page 34. 3.9.2.2 Map The map shows the current position of the product and the set centerpoint (origin) for GeoFence. 3.9.2.3 Settings in Automower® Connect The product has factory settings but the settings can be - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 25
3. Use the arrow buttons and the OK button to copy the timer setting. You can copy the timer settings day to day or for the full week. 3.10.2.4 To reset the timer setting You can remove all timer settings and use the factory setting. The factory timer setting lets the product to operate all hours of - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 26
messages, there are tips and advice to help to rectify the fault. Refer to Troubleshooting on page 40. If the product is disrupted in any way, for example Messages > Info messages. 3. Read the messages and read the Troubleshooting to get information and recommendations to correct the faults. 3.10.6 - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 27
carrying out some of the manual settings in the Lawn coverage menu. The Lawn coverage function is used to guide the product to remote is a GPS service. The GPS assisted navigation is used even if manual settings have been made. Only when GPS service is not available, the manual settings are used - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 28
product cannot follow the wire are: • Obstacles close to the wire have not been isolated. • The charging station, the boundary wire or the guide wire is not installed in accordance with the instructions in To install the charging station on page 20, To install the 28 - Installation 1230 - 001 - - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 29
to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Installation > Find the charging station > Guide or Boundary > More. 3. Use the arrow buttons to select Reset. 4. Push the OK button. To change the signal range of the charging station For some - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 30
adjusted automatically. Only in rare occasions manual settings need to be entered. The corridor width can be set between 0-9. If guide corridor width is set to 0, the product runs over the guide wire. The factory setting is 6 for the boundary wire and 9 for the guide wire. 1. Do steps 1-3 in To get - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 31
move through the menu structure Settings > Profiles > Use > Profile A, B or C > Select. 3.10.8.2 ECO mode ECO mode stops the signal in the boundary loop, the guide wire and the charging station, when the product is parked or is charging. Note: Use ECO mode to save energy and avoid interference with - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 32
. 2. Use the arrow buttons and the OK button to move through the menu structure Accessories > Automower® Connect > Pairing > New pairing. 3. Follow the instructions in the app. To set the Geofence level of sensitivity The higher level of Geofence sensitivity, the easier the alarm starts. 1. Do steps - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 33
Note: There is a maximum of 10 SMS each month from the product. Network SIM PIN This menu is only applicable if you use a nonHusqvarna SIM. APN settings The product must specify APN settings to be able to use and send data via the mobile net. Settings for Husqvarna SIM is default. To reset the - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 34
Operation 4.1 Main switch WARNING: Read the safety instructions carefully before you start the product. WARNING: Keep is empty. When the battery is empty, the product stops and the message Needs manual charging shows in the product display. Put the product in the charging station to charge the battery - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 35
If the product charges in the Secondary area mode, it will fully charge, move out about 50 cm / 20 in. and then stop. This means that the product is charged and prepared to start to cut. Note: It is recommended to change the operation selection to Main area before you put the product in the charging - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 36
4. The display shows a message that charging is in progress. 36 - Operation 1230 - 001 - - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 37
life: check and clean the product regularly and replace worn parts if necessary. All maintenance and servicing must be done according to Husqvarna's instructions. Refer to Maintenance on page 37. It is important that the blade disc rotates easily. The edges of the blades should not be damaged - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 38
the body and the hatch. 3. Rotate the skid plate so that its holes align with the screws for the blade. 4. Remove the 3 screws. Use a manual straight slot or cross-tip screwdriver. CAUTION: The battery must be charged fully before winter storage. If the battery is not fully charged it can - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 39
will maintain the product in good condition and create the best conditions for a new season without any disruptions. Service usually includes the following: • Thorough cleaning of the body, the chassis, the blade disc and all other moving parts. • Testing of the products's function and - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 40
6 Troubleshooting 6.1 Introduction - troubleshooting In this chapter, a number of messages are listed which may be shown in the display if there is a malfunction. There is a proposal as to the cause and steps to take for each message. This chapter also presents some symptoms that can guide you if - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 41
is laid in the wrong direction around an island. Check that the boundary wire was laid according to instructions, e.g. in the right direction around the island. Refer to Before the installation of the product on page for five minutes. you forget the PIN code. 1230 - 001 - Troubleshooting - 41 - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 42
station. Check that the charging station and the guide wire are installed in accordance with the instructions. Refer to Installation of the product on page 20. The guide wire is broken or not connec- Find out until the lawn has dried before using the product. 42 - Troubleshooting 1230 - 001 - - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 43
turned over. face, and start the product again. Needs manual charging The product is set to the Secondary area operating problem, front/rear freely around its chassis. move freely around its chassis. If the problem remains, the message requires action by an authorized service Troubleshooting - 43 - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 44
an authorized service technician. Switch off/on the product. If the problem remains, the message requires action by an authorized service technician. Switch off/on the product. If the problem remains, the message requires action by an authorized service technician. 44 - Troubleshooting 1230 - 001 - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 45
Action Check that the charging station and the guide wire are installed in accordance with the instructions. Refer to Before the installation of the product on page 16. The guide wire is broken or not connec- Find are mounted on any of the three blade positions. 1230 - 001 - Troubleshooting - 45 - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 46
guide wires are installed according to the instructions. Refer to To install the guide wire on page 21. Guide calibration The product has succeeded to calibrate No action required. accomplished the guide wire. GPS navigation problem Problem and instead use the manual settings for Lawn coverage. - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 47
the product is not upside down. If the problem remains, the message requires action by an authorized service technician. SIM card requires The SIM card must green light. If any other color than green is visible, follow the troubleshooting guide below. There is more help on www.husqvarna.com. If you - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 48
the product can be activated. There is more help on www.husqvarna.com. If you still need help, please contact your local Husqvarna representative. 48 - Troubleshooting 1230 - 001 - - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 49
6.6 Symptoms If your product does not work as expected, follow the symptoms guide below. There is a FAQ (Frequently Asked Questions) on www.husqvarna.com which provides more detailed answers . Edit the timer settings or press the START button to start the product. 1230 - 001 - Troubleshooting - 49 - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 50
too low right after the installation can damage wire insulation. Damage to the insulation may not cause disruptions until several weeks or months later. 50 - Troubleshooting 1230 - 001 - - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 51
Please first check all known splices before further troubleshooting is done. A wire break can be located wire between AL and the point where the guide wire is connected to the boundary wire (thick light and a flashing blue light. Then follow instruction in step 5 below. 4. If indicator lamp still - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 52
5. When the break is found, the damaged section must be replaced with a new wire. Always use original couplers. 52 - Troubleshooting 1230 - 001 - - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 53
7 Transportation, storage and disposal 7.1 Transportation The supplied Li-ion batteries obey the Dangerous Goods Legislation requirements. • Obey all applicable national regulations. • Obey the special requirement on package and labels for commercial transportations, including by third parties and - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 54
8.1 Technical data Dimensions Length, cm / " Width, cm / " Height, cm / " Weight, kg / lbs 8 Technical data Automower® 430XH Automower® 450XH 75 / 29.5 75 / 29.5 63 / 24.8 63 / 24.8 33 / 13 33 / 13 14.7 / 5.8 15.3 / 6 Electrical system Battery, Lithium-Ion 18 V/5.2 Ah Art. No. Battery, - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 55
passage, cm / " Maximum angle for work area, % Maximum angle for boundary wire, % Maximum length boundary wire, m / ft Maximum length guide loop, m / ft Working capacity, m2 / acre(s), +/- 20% IP-classification Robotic lawn mower Charging station Power supply Automower® 430XH Automower® 450XH - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 56
Frequency Band Support Automower® Connect 3G Automower® Connect 2G Band 19 (800 MHz) Band 5 (850 MHz) Band 8 (900 MHz) Band 2 (1900 MHz) Band 1 (2100 MHz) GSM 850 MHz E- - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 57
station may only be used in compliance with the instructions in this Operator's Manual. This manufacturer's warranty does not affect warranty entitlements product, please contact Husqvarna customer service for further instructions. Please have the receipt and the product's serial - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 58
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 59
1230 - 001 - Applicable to US/CA market - 59 - Husqvarna AUTOMOWER 430XH | Owner Manual - Page 60
AUTOMOWER® is a trademark owned by Husqvarna AB. Copyright© 2019 HUSQVARNA. All rights reserved. www.husqvarna.com Original instructions 1141532-95 2019-07-05
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
 |
 |
EN, English
Operator's manual
HUSQVARNA AUTOMOWER
®
430XH/450XH
Read the operator's manual carefully and make sure that you
understand the instructions before you use the product.