Husqvarna AUTOMOWER 430XH Owner Manual - Page 33
Accessories > Automower Connect > Reset
![]() |
View all Husqvarna AUTOMOWER 430XH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Note: There is a maximum of 10 SMS each month from the product. Network SIM PIN This menu is only applicable if you use a nonHusqvarna SIM. APN settings The product must specify APN settings to be able to use and send data via the mobile net. Settings for Husqvarna SIM is default. To reset the Automower® Connect settings 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Accessories > Automower Connect > Reset. 3. Proceed with reset of Automower Connect settings when you select YES. 4. Push the OK button. 3.10.9.3 Headlights To set the schedule for the headlights 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Accessories > Headlights > Schedule. 3. Select between Always ON, Evening only, Evening & night or Always OFF. Note: Evening only will start the schedule for the headlights at sunset and stop at midnight. Evening & night will start the schedule for the headlights at sunset and stop at sunrise. 3.10.9.4 Ultrasonic (Automower® 450XH) The Ultrasonic function makes the product decrease speed when the product comes near an obstacle. The product operates at a lower speed if the Ultrasonic function is disabled. To set the Ultrasonic function 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Accessories > Ultrasonic > Use. 3.10.9.5 Mower house When this option is enabled, the wear on the product and the house is reduced, but it can result in more uncut grass around the charging station. To avoid collisions with the mower house 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Accessories > Mower house > Avoid collisions with mower house. To set the Flashes when fault function The headlights flashes if the product stops to operate because of a fault if Flashes when fault is enabled. 1. Do steps 1-3 in To get access to the menu on page 24. 2. Use the arrow buttons and the OK button to move through the menu structure Accessories > Headlights > Flashes when fault. 3. Use the OK button to enable or disable the Flashes when fault function. 1230 - 001 - Installation - 33
![](/manual_guide/products/husqvarna-automower-430xh-owner-manual-c6dbe85/33.png)