Husqvarna L321AHE Owner Manual - Page 20
Montage Et RÉglages, Maintenance - charger
View all Husqvarna L321AHE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
General MAINTENANCE WARNING! The user must only carry out the maintenance and service work described in this manual. More extensive work must be carried out by an authorized service workshop. Switch off the engine before carrying out any checks or maintenance. Stop the engine (motor) and wait until the blade comes to a complete stop before cleaning the machine, removing the grass catcher, or unclogging the discharge chute. Prevent unintentional starting by removing the ignition cable from the spark plug. The starter key or battery must also be removed on machines with electric start. The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer. • Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs. • Replace any damaged, worn or broken parts. • Always use genuine accessories. Maintenance schedule In the maintenance schedule you can see which parts of your machine that require maintenance, and with which intervals it should take place. The intervals are calculated based on average use of the machine, and may differ depending on the rate of your personal use. Daily Maintenance Lawn mower Tighten bolts and nuts. Clean / Inspect Grass Catcher * Check tires Check drivewheels*** Clean the machine**** Clean under the drive cover*** Check the drive belt / Pulleys*** Check that the cutter is undamaged and not cracked. Replace the cutter if necessary. General lubrication Clean and Recharge Battery ** Engine Check the engine's oil level Change engine oil Clean the air filter. Replace if necessary. Check that the muffler is securely attached and not damaged. Replace the spark plug. Empty fuel tank or add Stabilizer Before use X X X X X5 After Every Every Every Before each use 10 hours 25 hours 100 hours storage X X X X X X X X3 X X X4 X1,2 X2 X X X * If so equipped ** Machines equipped with electric start *** Power-Propelled machines **** Use a scraper to clean under deck Note 1: When operating with a heavy load or at high ambient temperatures, or other extreme conditions, service the machine more often. Note 2: Clean more often if conditions are exceptionally dusty. Note 3: Replace blades more often when mowing in sandy soil. Note 4: Charge the battery for max. 48 hours. Note 5: And after 5 hours of use. 20 - English MONTAGE ET RÉGLAGES 3 Fermer le bouclier arrière pour laisser la machine décharger le matériau à la gauche de la machine lors de la coupe. Remplissage d'huile • Le réservoir d'huile est vide à la livraison. Remplir doucement le réservoir d'huile avec l'huile incluse. Consulter les instructions sous la rubrique Entretien. Hauteur de coupe La hauteur de coupe peut être réglée sur neuf positions différentes (entre 1 et 9). Soulever les roues pour une hauteur de coupe basse et abaisser les roues pour une hauteur de coupe élevée. Régler la hauteur de coupe en fonction des besoins. La position moyenne est la meilleure pour la plupart des pelouses. • Pour modifier la hauteur de coupe, appuyer le levier de réglage de hauteur vers la roue. Déplacer la roue vers le haut ou vers le bas selon les besoins. Définir la même hauteur aux quatre coins. • Le levier de réglage est à ressort. French - 69