IBM 3580-L11 Setup Guide - Page 28
If the 3580 Tape Drive Is the Only Device On the SCSI Bus
View all IBM 3580-L11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
__ 3. Configure your 3580 Tape Drive similar to one of the following examples: v If the 3580 Tape Drive Is the Only Device On the SCSI Bus: connect the SCSI bus cable to the host (see Figure 3). The cable can be up to 25 m (82 ft) long when the 3580 Tape Drive is the only device on the bus. Figure 3. Example of Connecting One SCSI Device to the Host. The view is from the top. 1 3580 Tape Drive 2 SCSI connectors 3 Terminator 4 SCSI bus cable 5 SCSI host adapter card 6 Host 12 IBM 3580 Tape Drive Setup, Operator, and Service Guide
__ 3.
Configure your 3580 Tape Drive similar to one of the following examples:
v
If the 3580 Tape Drive Is the Only Device On the SCSI Bus:
connect
the SCSI bus cable to the host (see Figure 3). The cable can be up to 25
m (82 ft) long when the 3580 Tape Drive is the only device on the bus.
±1²
3580 Tape Drive
±5²
SCSI host adapter card
±2²
SCSI connectors
±6²
Host
±3²
Terminator
±4²
SCSI bus cable
Figure 3. Example of Connecting One SCSI Device to the Host. The view is from the top.
12
IBM 3580 Tape Drive Setup, Operator, and Service Guide