IBM 3580-L11 Setup Guide - Page 45
in. of tape hangs from the cartridge door. If necessary, grasp the tape
View all IBM 3580-L11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2. To find the end of the tape inside the cartridge, attach the cartridge manual rewind tool ( 1 in Figure 11) to the cartridge's hub 2 by fitting the tool's teeth between the teeth of the hub. Turn the tool clockwise until you can see the end of the tape inside the cartridge. Then, slowly turn the rewind tool counterclockwise to bring the tape edge toward the cartridge door. 3. Continue to turn the rewind tool counterclockwise until approximately 12.7 cm (5 in.) of tape hangs from the cartridge door. If necessary, grasp the tape and pull gently to unwind it from the cartridge. 4. Remove the rewind tool by pulling it away from the cartridge. Set the tool and the cartridge aside. Figure 11. Winding the Tape Out of the Cartridge. Turn the cartridge manual rewind tool clockwise to see the end of the tape, then turn it counterclockwise to bring the tape to the door. Chapter 4. Using the Media 29