IBM 4910-33D Installation Guide - Page 18
Environmental considerations, User information, Controls and indicators (front view)
View all IBM 4910-33D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Product introduction March 2009 Port power ratings: Table 4. Port power ratings Port/name Powered Serial Ports C/D/E/F USB (2 back, 1 front) 12V powered USB - A/B/C/D 24V powered USB - E Cash Drawer Keyboard and Mouse Port Voltage Ratings 5V 12V 5V 12V 24V 24V 5V Maximum Current 1.0A 1.0A 0.5A 1.5A 3.0A 1.0 A / 150 ms pulse 1.0A Notes: 1. Suspend-to-RAM (S3) wake-capable ports include: v USB ports 1 and 2 v PS/2 keyboard and mouse ports v 12V powered USB port A (RS232 connector card) v 12V powered USB port D (USB connector card) Note that 12V is not present during Suspend-to-RAM (S3). Ports are enabled for wake through BIOS setup. 2. Combined, the wake-enabled USB ports 1 and 2, the 12V USB port, and the PS/2 keyboard and mouse ports can only support a maximum 5V load of 1.5A without the modular flash drive installed or 1.2A with the modular flash drive installed. 3. The total 12V current for all external loads is 3A. 4. The total 5V current for all external loads is 3.5A. Environmental considerations These are the temperature and humidity requirements: v Operating: +5°C to 40°C (41° to 104°F) with 8% to 80% relative humidity v Shipping: −40°C to +60°C (−40° to 140° F), which includes condensation but not rain v Storage: 0°C to +60°C (32° to 140° F) A fan contained in the power supply provides forced-air cooling. All the vents on the front and rear of the 4810/4910 must have 51 mm (2 in.) minimum clearance. The 4810/4910 SurePOS 300 meets applicable worldwide Electromagnetic Compatibility (EMC) standards. Refer to Appendix C, "Notices," on page 57 for a complete description. User information Controls and indicators (front view) Figure 2 on page 5 shows the indicators that are available on the front view of the 4810/4910 system unit. 4 SurePOS Installation and Service